Outrageous Boat: the Dragon Head (Improvements)
Posted on

The model of a outrageous boat built using LEGO® pieces.
Disclaimer: LEGO® is a trademark of the LEGO Group of companies which does not sponsor, authorize or endorse this project.
Compared to the previous version, I made a number of improvements:
- filled in the dragon's mouth (it looked empty before)
- replaced parts with unsuitable colors (they stood out where they shouldn't have)
- chose a color scheme for the subassembly that holds the lower jaw
I filled the mouth with part "6433578: WHEEL BALL, DIA. 19, NO. 1" (a stunningly beautiful part; I took it from the "71802 Nya's Rising Dragon Strike" set), which is held by parts "6510188: HANDLE, NO. 1" and "6245306: PARABOLIC ELEMENT Ø16" (thanks to their transparency, it seems that the part "6433578: WHEEL BALL, DIA. 19, NO. 1" is held by itself; I took them from the sets "75575 Ilu Discovery" and "43223 Asha in the City of Rosas," respectively).
I replaced part "6327561: LEVER 1X4, WITHOUT NOTCH" with the same part in white. It turned out to be not so easy to find - it is very rare. And what luck that there is a polybag "30682 NASA Mars Rover Perseverance," which contains as many as 6 such parts! It also has a white part "6346389: TECHNIC CROSS BLOCK, FORK 2X2," which I was thinking of replacing the used black version with. But then I decided to leave it as it is — the base to which the lower jaw is attached will also be black in the final version.
I couldn't decide on a color scheme for the subassembly for a long time. I found all the parts in two colors — black and red — and spent a long time combining them. But since I could only assemble one specific version at a time, the process was not very clear. Then I assembled all the options in a 3D editor at the same time, placed them next to each other, and this significantly sped up the selection process!
Photos
General photos








Inner structure






Subassembly color scheme selection




Videos
Copyrights
- the models of the subassembly options were made in Mecabricks;
- the animation of the subassembly options was made in Blender;
- "Wizard" clipart — CC0 1.0, Copyright (C) 2011 tzunghaor, https://openclipart.org/detail/165500/wizard;
- "Roboto" font — Apache-2.0, Copyright (C) 2016-2017 Christian Robertson, https://fonts.google.com/specimen/Roboto;
- "Fait Accompli" — CC BY 4.0, Copyright (C) 2015 Squire Tuck, https://freemusicarchive.org/music/Squire_Tuck/2015021152908025/Fait_Accompli/.